
Polish before the walls go up
On new builds, the best time to polish is early, before drywall and trim. We can work edge to edge without scuffing finished walls. We work with general contractors and custom home builders to fit into the schedule.

Polished Concrete
Polished concrete starts with the slab you already have. We grind it flat with progressively finer diamonds, harden it with a densifier, and polish it to the level of shine you want, from a soft satin to a mirror finish.
Dyes and score lines open up the design side: two-tone patterns, sweeping curves, borders and logos, all ground right into the floor. The result is tough, easy to clean, and handles heavy foot traffic for years.
Lobbies, venues, churches, offices and retail.
Best done before drywall. We coordinate with your builder.
Two-tone designs, curves, borders and custom layouts.
Modern homes, basements and living spaces.

On new builds, the best time to polish is early, before drywall and trim. We can work edge to edge without scuffing finished walls. We work with general contractors and custom home builders to fit into the schedule.

Dyed concrete lets a floor carry a design: a wave down a hallway, a geometric lobby, a contrasting border. Because it’s part of the concrete, it doesn’t peel or wear off like a coating can.
Our work
Reviews
Previously the rain overwhelmed the French drain, water backed up about 5-6 inches on the outside wall of my house and seeped into the house flooding the carpets… Have had two major rain storms since the entire rework… That entire section of the house could handle a Noah’s Ark type flood with no problem.
The say the devil is in the details, and these men cover all the details, in addition to making recommendations for improvements… They took a 14’×40’ disaster and turned it into a thing of beauty.
Tom was easy to work with and the crew was hardworking and respectful. Several times during construction we had cloudburst rains that flooded the work area and they were there with a shovel trenching the water away from the pool…
Polishing refines the concrete itself and suits clean, sound slabs, especially in commercial and modern residential spaces. A polyaspartic coating is better for garages, shops and cracked or stained floors because it covers and protects. Not sure? Send photos and we’ll tell you.
A properly polished and maintained floor is generally no more slippery than other hard floors when dry. We’ll talk through the right finish level for your space.
Often, yes, as long as the slab is in reasonable shape. Old glue, coatings or heavy damage add prep work. We’ll look at it and give you a straight answer.
Free estimates
Two ways to get a free estimate, and you’ll be talking to an owner either way.


Message Nick on Instagram with a few photos of your project. He’ll DM you back, no phone call needed.
Rather use Facebook? Message Nick on Messenger.
Prefer email or a form? Request an estimate online.