Skip to content

New Polyaspartic floor coatings

Your garage floor, but way better.

Diamond-ground, crack-repaired and coated in a tough flake finish that stands up to hot tires, oil and Oklahoma winters. Done in two days, for garages, basements and shops across the Tulsa area.

  • 2-day install
  • UV stable, won’t yellow
  • Free estimates
Nick Wilsterman rolling the final coat on a finished flake polyaspartic garage floor

Tom & Nick, on the job together

DM Nick a photo of your floor for a quick answer.

Why polyaspartic

Not your neighbor’s peeling epoxy kit.

Polyaspartic is a professional-grade coating that cures fast and holds its color in the sun. Put it over properly ground concrete with a full broadcast of flake, and you get a floor that’s tougher, better looking and quicker to install than the roll-on kits at the big-box store.

The coating’s only as good as the prep, so we never skip the grinding.

FeatureBare concreteDIY epoxy kitBy Design polyaspartic
Typical install—A weekend, plus days of cure2 days
Surface prep—Acid etch or scrubDiamond grinding + crack repair
Hot-tire peeling—CommonBuilt to resist it
Sunlight / yellowingStains & dustEpoxy can amber in UVUV stable
Oil, salt & spillsSoaks in & stainsVariesWipes up
Cracks & old stainsVisibleShow throughRepaired & hidden

Engineered for every space

Garages. Basements. Big shops.

Three real projects. Drag the sliders to see the before and after.

Nick Wilsterman rolling the final coat on a finished flake polyaspartic garage floor
Nick Wilsterman diamond-grinding an old garage floor with a dust-extraction vacuum attached
Before After
Cracked garage steps repaired and wrapped in the same flake coating as the floor
Finished garage floor with both sets of entry steps fully coated

Garages · Attached garage · Tulsa area

The biggest room in the house, finally finished

This family’s garage had years of stains and chipped, crumbling steps up to the house. We ground it down, rebuilt and wrapped the steps, and coated everything in a full-broadcast flake floor.

  • Stands up to hot tires, oil, salt and antifreeze
  • Dirt sweeps up instead of tracking into the house
  • Cracked steps rebuilt and coated to match
The same basement after coating: every crack hidden under a seamless floor
Basement floor before coating: a web of cracks, all patched and ground
Before After
Nick and the crew broadcasting color flakes onto a wet basement base coat
Finished basement game room floor with a seamless light flake coating

Basements · Estate basement · Broken Arrow

From cracked slab to game room

This lower level doubles as a storm shelter and a game room. The slab had a web of cracks running through it. We stitched and filled every one, then coated the whole floor so it reads as one seamless surface.

  • Cracks repaired, then hidden under the coating
  • Seals the concrete: no dust, spills wipe up
  • Clean, bright finish for game rooms and shelters
Workshop floor after: dense flake polyaspartic coating, no cracks visible
Workshop floor before: spiderweb cracks across the slab
Before After
Large detached metal workshop in Jenks with a cracked concrete floor, before coating
One workshop floor showing three stages at once: ground slab, wet base coat, and Nick broadcasting flakes

Shops & outbuildings · Detached workshop · Jenks

Built for tool drops and chemical spills

A big, beautiful metal shop with a slab full of settling cracks. After grinding and crack repair, we coated it in a dense flake system built for rolling toolboxes, dropped tools and the occasional fluid leak.

  • Heavy-duty finish for working shops
  • Large open slabs coated edge to edge
  • Shrugs off oil, fuel and chemical drips

How we do it

Five steps. No shortcuts.

Here’s all of it in one photo: ground and repaired slab in front, wet base coat in the middle, and Nick broadcasting flake in the back.

One workshop floor showing three stages at once: ground slab, wet base coat, and Nick broadcasting flakes
  1. Nick Wilsterman diamond-grinding an old garage floor with a dust-extraction vacuum attached
    1

    Diamond grind

    We grind off the old surface, stains and weak top layer with dust extraction running, so the coating bonds to clean, open concrete. No acid-wash shortcuts.

  2. Basement floor before coating: a web of cracks, all patched and ground
    2

    Repair cracks

    Cracks, chips and spalls get filled and leveled. Broken steps get rebuilt. Problems get fixed now, not hidden.

  3. Nick Wilsterman in spiked shoes rolling the glossy base coat across a garage floor
    3

    Base coat

    A pigmented base coat goes down wall to wall. We wear spiked shoes so we can walk the wet floor and keep it even.

  4. Nick and the crew broadcasting color flakes onto a wet basement base coat
    4

    Broadcast flake

    Decorative flake is broadcast by hand until the floor is fully covered. That gives it texture, grip, and the look you picked.

  5. Cracked garage steps repaired and wrapped in the same flake coating as the floor
    5

    Clear topcoat

    Excess flake is scraped and swept, then a clear polyaspartic topcoat locks it all in: steps, edges and all.

Floor coating questions

What’s the difference between polyaspartic and epoxy?

Both are tough coatings, but polyaspartic cures much faster and is UV stable, so it won’t yellow in a sunny garage the way many epoxies do. Faster curing means we can finish a garage in two days instead of tying it up for most of a week.

How long until I can use my garage again?

A proper install takes two days. Be wary of anyone who promises one. Foot traffic and parking come back quickly after that. We’ll give you exact times for your floor, since temperature and the system we use make a difference.

My floor is cracked. Can it still be coated?

Yes. Most of the floors we coat are cracked. We grind, fill and level the cracks first, and the full-flake coating hides the repairs. See the basement and workshop above for examples.

Can you coat my garage steps too?

Yes, and we recommend it. Chipped steps get rebuilt and wrapped in the same coating, so the whole garage matches.

Is it slippery?

The broadcast flake gives the surface texture. If you need extra grip, an anti-slip additive can go into the topcoat. Just ask.

What colors can I get?

There are a lot of flake blends and base colors, from subtle grays to bold mixes. We’ll help you pick one that suits the space.

How much does it cost?

It depends on square footage, the condition of the slab, and how much repair it needs. The fastest way to find out: text a few photos of your floor and the rough size, and we’ll take it from there.

Free estimates

Show us your floor.

DM Nick a photo for the quickest answer, or call Tom if you’d rather talk it through.

Tom Wilsterman sitting in an inner tube in the pool, hand-finishing the edge of a freshly poured pool deck Tom · Dad

Rather talk it through?

Call Tom. He loves talking concrete, will happily come out and walk the job with you, and gives you a straight answer about what it needs.

Call Tom (918) 369-7131

Rather text? Text Tom, photos welcome.

Nick Wilsterman rolling the final coat on a finished flake polyaspartic garage floor Nick · Son

Not a phone person?

Message Nick on Instagram with a few photos of your project. He’ll DM you back, no phone call needed.

DM Nick @bydesigntulsa

Rather use Facebook? Message Nick on Messenger.

Prefer email or a form? Request an estimate online.